Skip to main content

Fascia & Eaves

Fascia, soffits and eaves

The parts of a house nobody looks at until they fail — and the parts that show first when they do.

  • Free Quotes
  • Residential & Commercial
  • Local Melbourne Painters

Overview

Fascias and eaves take direct weather, sit hard against gutters that hold water, and are difficult to reach, which is why they are so often left until the coating has properly failed. By that point there is usually timber damage as well as paint damage.

They are also the elements that frame the whole roofline. A crisp, clean fascia line lifts a facade more than almost any other single element.

Summary

At a glance

Service
Fascia, Soffits & Eaves — Fascias, soffits and eaves prepared and coated, with moisture and rust addressed first.
Where it is offered
Fascia & Eaves is offered across Melbourne and surrounding suburbs, generally within about 40 km of Balwyn.
Quoting
Fascia & Eaves is quoted in writing at no charge, after an inspection of the actual surfaces.

What we cover

What's included

  • Timber fascias

    Scraped, sanded, filled and primed before finish coats.

  • Metal fascias and gutters

    Compatible metal substrates cleaned, with rust spots treated rather than coated over.

  • Soffits and eaves linings

    Sheeting cleaned and coated, with vents and joints cut in neatly.

  • Barge boards and gable ends

    Prepared with the same care as the main fascia line.

  • Rot and moisture inspection

    Soft, swollen or decayed timber identified and discussed before coating.

Our process

How the work runs

  1. Step 1: Access and protection

    Appropriate access equipment set up, and the ground, gardens and paving below protected.

  2. Step 2: Inspect for rot and rust

    Timber checked for decay, metal checked for rust. Coating over either simply hides a problem that will return.

  3. Step 3: Clean and prepare

    Surfaces washed, failed coatings scraped back, timber sanded and rust spots treated.

  4. Step 4: Fill and prime

    Splits and gaps filled, bare timber and treated metal primed with a product suited to the substrate.

  5. Step 5: Finish coats and clean-up

    Exterior coats applied, cut in cleanly against the gutter and wall, then gutters and the ground below cleaned down.

Why it holds up

What you get

  • Rust and decay identified before anything is coated over
  • Clean cut-in line where fascia meets gutter and wall
  • Ground, gardens and paving protected beneath the work area
  • Appropriate access equipment for the height involved

Questions

Common questions

If your question is not here, call and ask. We would rather explain it properly than have you guess.

  • Can you paint the gutters as well?

    Compatible metal gutters can generally be coated once they are clean, sound and any rust has been treated. We will confirm what is appropriate for your gutters during the inspection.

  • What if the fascia timber is rotten?

    We will show you what we have found and talk through how it should be addressed before painting. Coating decayed timber does not stop the decay, so the repair needs to happen first for the work to be worth doing.

  • Do the gutters need to be removed?

    Usually not. Most fascia work can be completed with the gutters in place, though the back edge behind a gutter cannot be coated without removal, and we will be clear about what is and is not included.

Where we work

Fascia & Eaves across Melbourne

We work throughout Melbourne and surrounding suburbs, generally within about 40 km of the city. If your property sits outside that, ask — we travel for larger projects.

Balwyn · Brighton · Camberwell · Kew · Hawthorn · Malvern · Richmond · South Yarra · Toorak · Armadale · Canterbury · Surrey Hills

Free, no-obligation quotes

Get a written quote for your painting job

Tell us what needs painting and send a few photos. We will inspect the property and put a written, itemised quote in front of you — in Australian dollars, with the scope spelled out.

Optional measurement cookies

With your permission, Google Ads uses cookies and information about your visit to measure which ads lead to quote requests and phone-link clicks. Your quote details are not sent to Google. You can use the website without allowing this.

Change your choice through Cookie settings in the footer. Withdrawing permission reloads this page. Privacy policy