Shutters
Shutter painting
Detailed, repetitive work where the difference between a good and a poor result is entirely in the preparation and the application.
- Free Quotes
- Residential & Commercial
- Local Melbourne Painters
Overview
Shutters are one of the most visible elements on a facade and one of the most difficult to coat well. Louvres have to be finished evenly on every face without runs collecting in the corners or the blades sticking together as the coating cures.
We work on timber shutters and on synthetic shutters where the material is genuinely paint-compatible. Some composite and vinyl products are not, and we will tell you if yours fall into that category rather than coating them and hoping.
Summary
At a glance
- Service
- Shutter Painting — Timber and paint-compatible shutters cleaned, prepared and coated evenly across every louvre.
- Where it is offered
- Shutters is offered across Melbourne and surrounding suburbs, generally within about 40 km of Balwyn.
- Quoting
- Shutters is quoted in writing at no charge, after an inspection of the actual surfaces.
What we cover
What's included
Timber shutters
Cleaned, sanded, filled where needed and coated with an exterior system.
Paint-compatible synthetic shutters
Assessed for suitability first, then prepared with an adhesion primer.
Hardware protection
Hinges, catches and stays removed or masked so the coating is clean at the fittings.
Colour matching
Matched to an existing facade scheme or to new trim colours.
Our process
How the work runs
Step 1: Assess the material
Confirm what the shutters are made of and whether they will accept and hold a coating.
Step 2: Clean
Washed down to remove dirt, chalking and any organic growth, then dried thoroughly.
Step 3: Sand and prepare
Existing coatings keyed back, failed areas removed, splits and damage filled where the material allows.
Step 4: Mask or remove hardware
Fittings taken off where practical or masked cleanly, so there is no coating on the hardware.
Step 5: Prime
A primer suited to the substrate — bare timber and synthetic materials need very different products.
Step 6: Finish coats
Applied by spray or brush depending on the shutter, the setting and the level of finish agreed, working louvre by louvre.
Why it holds up
What you get
- Material assessed for paint compatibility before any work is quoted
- Hardware removed or properly masked rather than coated around
- Even coverage across every louvre face
- Care taken that blades do not stick as the coating cures
Questions
Common questions
If your question is not here, call and ask. We would rather explain it properly than have you guess.
Can all shutters be painted?
No. Timber shutters take a coating well. Some synthetic, vinyl and composite shutters are manufactured with surfaces that coatings will not reliably adhere to, and painting them creates a problem rather than solving one. We check the material first and tell you honestly what we find.
Are the shutters painted in place or removed?
It depends on the shutters, their fixings and the finish level agreed. We will confirm the approach for your job during the inspection.
Will the louvres stick together afterwards?
Not if the coating is applied at the right build and given proper time to cure before the shutters are operated. Rushing that is what causes blades to bond, so we will tell you when they are safe to use normally.
Where we work
Shutters across Melbourne
We work throughout Melbourne and surrounding suburbs, generally within about 40 km of the city. If your property sits outside that, ask — we travel for larger projects.
Balwyn · Brighton · Camberwell · Kew · Hawthorn · Malvern · Richmond · South Yarra · Toorak · Armadale · Canterbury · Surrey Hills
Explore
Related services
- Learn more
Exterior Painting
Brick, render, weatherboard, trim, decks, fences and pergolas prepared for Melbourne conditions.
- Learn more
Exterior Door Painting
Entry doors and frames in timber, metal and suitable composites, prepared for sun and weather.
- Learn more
Fascia, Soffits & Eaves
Fascias, soffits and eaves prepared and coated, with moisture and rust addressed first.

Free, no-obligation quotes
Get a written quote for your painting job
Tell us what needs painting and send a few photos. We will inspect the property and put a written, itemised quote in front of you — in Australian dollars, with the scope spelled out.