Kitchen Cabinets
Cabinet refinishing
A considered alternative to replacing joinery that is structurally sound but dated.
- Free Quotes
- Residential & Commercial
- Local Melbourne Painters
Can kitchen cabinets be painted instead of replaced?
Yes, when the carcasses and hinges are structurally sound and the doors are not swollen or delaminating. Painting changes the colour and finish of existing joinery; it does not change the layout, the hardware or the condition of what is underneath, so the decision rests on whether the kitchen works and simply looks dated.
Overview
Kitchen cabinetry is the hardest-working painted surface in a house. It is handled constantly, cleaned with detergent, and exposed to heat, steam and cooking residue. A coating that was not properly prepared for will show it within months, usually around the handles and the edges of the doors first.
Refinishing existing joinery is worth considering when the carcasses and hinges are sound and it is the colour and finish that have dated. Where the joinery itself is failing, replacement is the honest recommendation and we will say so.
Summary
At a glance
- Service
- Kitchen Cabinets & Built-Ins — Cabinet refinishing for kitchens, laundries, wardrobes and built-in joinery, using a coating system built for handling.
- Suitable for
- Kitchens, laundries, vanities and built-in wardrobes where the joinery is structurally sound but the finish is dated or worn.
- Surfaces and systems
- Adhesion and bonding primers for melamine, laminate and previously coated joinery, Cabinet and joinery topcoats formulated for frequent handling and cleaning and Fillers suited to board edges and profile damage.
- Finish options
- Satin — the most common choice, soft in appearance and practical to clean, Semi-gloss — harder wearing and easier to wipe, with more light reflection and Matte — contemporary, though it marks more readily around handles.
- Preparation
- Doors and drawer fronts are removed and labelled, hardware is taken off, surfaces are degreased and abraded, and an adhesion primer suited to the substrate is applied before finish coats.
- Where it is offered
- Kitchen Cabinets is offered across Melbourne and surrounding suburbs, generally within about 40 km of Balwyn.
- Quoting
- Kitchen Cabinets is quoted in writing at no charge, after an inspection of the actual surfaces.
What we cover
What's included
Kitchen cabinetry
Doors, drawer fronts, end panels and exposed carcass edges.
Laundry joinery
Cupboards and benches in an environment with more moisture than most.
Wardrobes and built-ins
Bedroom robes, shelving and study joinery.
Vanities and bathroom cabinetry
Prepared with the moisture exposure of the room in mind.
Our process
How the work runs
Step 1: Remove doors and hardware
Doors and drawer fronts taken off and labelled where practical, and handles and hinges removed so edges can be finished properly.
Step 2: Degrease
Kitchen joinery carries cooking residue that is invisible but will stop a coating adhering. Surfaces are washed down thoroughly before anything else happens.
Step 3: Sand and repair
Existing finishes keyed back, chips and edge damage filled, and any lifting laminate or veneer assessed and discussed with you.
Step 4: Bonding primer
An adhesion primer suited to the existing surface — melamine, laminate, polyurethane, stained timber and previously painted joinery each need a different approach.
Step 5: Finish coats
A cabinet-grade coating applied by spray or brush and roller depending on the system, the setting and the level of finish agreed.
Step 6: Reinstate and clean up
Doors rehung and aligned, hardware refitted, and the kitchen cleaned down and handed back.
Why it holds up
What you get
- Doors removed so edges and profiles are properly coated
- Thorough degreasing before any sanding or coating
- Adhesion primer selected for the existing substrate
- Coating systems chosen for handling, cleaning and heat around a kitchen
Systems and materials
- Adhesion and bonding primers for melamine, laminate and previously coated joinery
- Cabinet and joinery topcoats formulated for frequent handling and cleaning
- Fillers suited to board edges and profile damage
The specific products for your project are named in your written quote, so you know what is going on your property before you accept it.
Finish options
- Satin — the most common choice, soft in appearance and practical to clean
- Semi-gloss — harder wearing and easier to wipe, with more light reflection
- Matte — contemporary, though it marks more readily around handles
Comparison
Repainting joinery compared with replacing it
Both are legitimate choices. Which one is right depends on the condition of the kitchen, not on which is generally better.
| Repainting existing joinery | Replacing the joinery | |
|---|---|---|
| What changes | Colour, sheen and hardware | Colour, layout, materials, storage and hardware |
| What stays the same | Carcasses, layout, door sizes and any existing damage inside | Nothing, other than what you choose to keep |
| Disruption | Doors are removed and returned; the kitchen stays usable for most of the work | The kitchen is out of use while it is stripped and rebuilt |
| Suits | A kitchen that works well and looks dated | A kitchen with poor layout, water damage or failing carcasses |
| Durability of the finish | Good when the substrate is correctly prepared and primed for it | Factory-applied finishes on new joinery |
The honest test is whether the kitchen frustrates you when you use it or only when you look at it. Painting fixes the second and none of the first.
Worth knowing
Limitations and upkeep
Before committing to this work
- Melamine, laminate and previously oiled timber all need different adhesion primers. The substrate has to be identified before a system is chosen, not after.
- Doors that are swollen, delaminating or water-damaged at the base will not be improved by paint and are better replaced.
- Painted joinery is durable but is not a factory two-pack finish. It benefits from being treated as a painted surface rather than a laminate one.
- Colour matching against an existing benchtop or splashback is best confirmed with a sample in the actual kitchen light before the whole job is committed to.
Afterwards
A painted kitchen holds up well when it is cleaned in a way that suits a paint film.
- Allow the finish to cure fully before heavy cleaning. Paint is touch-dry long before it reaches full hardness.
- Wipe with a soft damp cloth and a mild detergent. Abrasive creams and scouring pads will burnish the sheen unevenly.
- Wipe spills near the cooktop and sink rather than leaving them, particularly oil and anything acidic.
- Keep a record of the colour and system so a knock can be touched in years later.
Questions
Common questions
If your question is not here, call and ask. We would rather explain it properly than have you guess.
How long will my kitchen be out of action?
Timing depends on how much joinery there is, the coating system and drying conditions, so we confirm it after the inspection. Coatings also continue to harden after they are touch-dry, and we will tell you how to treat the surfaces during that period rather than giving you a single number that suits every job.
Is painting cabinets as durable as replacing them?
A properly prepared and correctly specified cabinet coating is genuinely durable, but it is a coating on existing joinery, not a new factory-finished door. Where the carcasses, hinges and layout are sound it is a sensible option. Where the joinery itself is failing, replacement is the better spend and we will tell you that.
Can you spray the doors off site?
Whether doors are finished on site or off site depends on the job, the system and the facilities available. We will confirm the approach for your project during the inspection rather than promising a particular method up front.
Can you paint melamine or laminate cupboards?
Yes. Melamine and laminate need thorough degreasing, keying back and a bonding primer designed for low-porosity surfaces. Skipping that preparation is the usual reason painted laminate fails.
Where we work
Kitchen Cabinets across Melbourne
We work throughout Melbourne and surrounding suburbs, generally within about 40 km of the city. If your property sits outside that, ask — we travel for larger projects.
Balwyn · Brighton · Camberwell · Kew · Hawthorn · Malvern · Richmond · South Yarra · Toorak · Armadale · Canterbury · Surrey Hills
Explore
Related services
- Learn more
Interior Painting
Walls, ceilings, trim, doors and built-ins, finished cleanly in homes people are still living in.
- Learn more
Doors, Trim & Frames
Skirting boards, architraves, door and window frames and doors, finished in a durable enamel system.
- Learn more
Colour Consultation
Help choosing a scheme that works in your light, on your surfaces and in your street.
- Learn more
Surface Preparation
Washing, crack repair, sanding, caulking, wallpaper removal, priming and sealing — the work a finish depends on.

Free, no-obligation quotes
Get a written quote for your painting job
Tell us what needs painting and send a few photos. We will inspect the property and put a written, itemised quote in front of you — in Australian dollars, with the scope spelled out.