Can brick houses be painted?
Painting brick: what homeowners should know
Yes. Most brick houses can be painted, provided the masonry is sound, the wall is dry, and a breathable coating system is used over the correct primer. The decision worth thinking about is not whether it can be done, but that it is very difficult to undo.
Published
Painting brick: what homeowners should know
Why the decision is close to permanent
Paint bonds into the open pores of a brick face. Removing it later means abrasive blasting or chemical stripping, both of which risk taking the fired outer skin of the brick with them — and a brick that has lost its face weathers far faster than one that never had it touched. Some paint always remains in the mortar joints.
That is not an argument against painting brick. It is an argument for treating it as a change to the building rather than a change of colour, and for being confident about the choice before the first coat goes on rather than after.
Moisture is the thing that actually decides it
Brick walls take on and give up water constantly. A coating that seals the face traps that moisture inside the wall, where it pushes the film off from behind and can carry salts to the surface. This is why exterior masonry is coated with breathable, vapour-permeable systems rather than with whatever happens to be in the shed.
Before any coating is specified, the wall is checked for the things that make moisture a problem: damp patches, salt deposits, failed or bridged damp-proof coursing, blocked weep holes, and mortar that has eroded back behind the brick face. Painting over an unresolved moisture problem hides it for about one season.
- Efflorescence — a white powdery bloom — means water is moving through the wall and depositing salts. Find the source first.
- Weep holes at the base of a cavity wall must stay open. They are not a defect and must not be filled or painted over.
- New masonry and new render need time to cure before coating. The alkalinity of fresh cement will attack a coating applied too early.
What preparation actually involves
Brick is washed to remove dirt, chalk and any biological growth, then left to dry properly — not overnight in a Melbourne winter, which is rarely long enough. Damaged mortar is raked out and repointed. Any previous coating that has lost adhesion is removed rather than painted over, because a new film is only ever as sound as the layer beneath it.
Bare masonry then takes a masonry sealer or primer chosen for the substrate, which stabilises the surface and gives the finish coat something consistent to bond to. Applying a topcoat directly to porous brick generally produces a patchy finish and a shorter life.
Alternatives worth considering first
If the goal is a lighter, more uniform facade, painting is not the only route. Bagging leaves the brick texture partly visible under a thin cement slurry. Rendering covers it entirely and gives a different surface again. Both change the wall as permanently as paint does, but they produce a different result and are worth looking at before committing.
If the brick is in good condition and the objection is that it is simply dirty, a thorough clean sometimes settles the question without any coating at all.
Common questions
Related questions
- Will painting brick cause damp?
- Painting brick with a non-breathable coating can trap moisture inside the wall, which leads to blistering, peeling and salt deposits. A vapour-permeable masonry system lets the wall continue to dry outwards, which is why the coating type matters more here than on almost any other exterior surface.
- Can painted brick be returned to bare brick?
- Sometimes, but not cleanly. Abrasive and chemical removal both risk damaging the fired face of the brick, and residue usually remains in the mortar joints. Treat painting brick as a one-way decision.
- How long does paint last on brick?
- It depends on the exposure of the wall, the condition of the masonry and the system used, so no single figure is honest. North and west-facing elevations in Melbourne weather noticeably faster than sheltered ones, and a wall with an unresolved moisture problem will fail regardless of the coating.
