Brick
Brick painting
A significant and largely permanent change to a facade. Worth doing carefully, and worth understanding before you commit.
- Free Quotes
- Residential & Commercial
- Local Melbourne Painters
Can brick houses be painted?
Yes. Most brick can be painted when the masonry is sound, the wall is dry, and a breathable coating system is used over the correct primer. The decision worth thinking about is not whether it can be done but that it is very difficult to undo — paint bonds into the open pores of the brick face.
Overview
Painting brickwork changes the character of a house completely, and it is a decision that is difficult and expensive to reverse. Once brick is coated it generally needs to stay coated, because removing paint from a porous masonry surface without damaging it is slow and costly work.
Where the decision is right — a mismatched extension, unattractive brick, or a facade already painted and now failing — a properly prepared masonry system gives a clean, uniform result that is straightforward to maintain.
Summary
At a glance
- Service
- Brick Painting — Painting face brick and previously coated brickwork, with mortar condition assessed first.
- Surfaces and systems
- Masonry sealers and alkali-resistant primers, Breathable exterior masonry coatings and Flexible sealants for control joints and window junctions.
- Where it is offered
- Brick is offered across Melbourne and surrounding suburbs, generally within about 40 km of Balwyn.
- Quoting
- Brick is quoted in writing at no charge, after an inspection of the actual surfaces.
What we cover
What's included
Face brick
Previously uncoated brickwork, sealed and coated with a breathable masonry system.
Previously painted brick
Existing coatings assessed, failing areas removed and the surface made good.
Mortar assessment
Perished or recessed mortar identified before coating, since paint will not bridge a failing joint.
Rendered and bagged brick
Part-rendered facades and bagged finishes, which behave differently to bare brick.
Rendered and bagged brick
The work
Brick photos
Before: stepped cracking and protection laid out After: brickwork and eaves repainted in white Before: tired cream paint and creeper marks Side elevation in white, finished
Our process
How the work runs
Step 1: Consultation
We look at the brick, the mortar, the existing coating if there is one, and talk through whether painting is genuinely the right decision for your facade.
Step 2: Cleaning
Pressure washing to remove dirt, chalking, efflorescence and organic growth, with mould treated where present.
Step 3: Brick and mortar inspection
Once the surface is clean we can see it properly — spalled bricks, perished mortar and moisture ingress are identified and discussed with you before coating.
Step 4: Repairs where included
Agreed repairs are carried out, or coordinated with a bricklayer where the work is outside a painting scope.
Step 5: Primer
A masonry sealer or primer suited to the porosity and alkalinity of the substrate, which is what stops the finish coats being drawn unevenly into the brick.
Step 6: Topcoats
Masonry finish coats applied to the manufacturer specification for the substrate and conditions.
Step 7: Final inspection
Walked with you in daylight, with attention to the mortar lines and the junctions around windows and eaves.
Why it holds up
What you get
- Honest advice about whether brick should be painted at all
- Mortar and brick condition assessed after cleaning, when it can actually be seen
- Masonry-appropriate sealers rather than a general-purpose primer
- Attention to the junctions where water gets behind a facade
Systems and materials
- Masonry sealers and alkali-resistant primers
- Breathable exterior masonry coatings
- Flexible sealants for control joints and window junctions
The specific products for your project are named in your written quote, so you know what is going on your property before you accept it.
Worth knowing
Limitations and upkeep
Before committing to this work
- Painting brick is close to permanent. Removal risks taking the fired outer face of the brick with it, and residue generally remains in the mortar joints.
- A wall showing efflorescence, damp patches or eroded mortar has a moisture problem. That is found and resolved before any coating is specified.
- Weep holes at the base of a cavity wall must stay open. They are not a defect and are never filled or coated over.
- A non-breathable coating traps moisture inside the wall, where it pushes the film off from behind. The system used on masonry has to be vapour permeable.
- Bagging, rendering and a thorough clean are all worth considering before painting, because each produces a different result and one of them may be what you actually want.
Afterwards
Painted masonry is straightforward to look after, and most of what shortens its life is water rather than sunlight.
- Keep gutters, downpipes and weep holes clear so water is not held against the wall.
- Wash the surface periodically to remove dirt and organic growth, particularly on shaded elevations.
- Watch for a white powdery bloom appearing through the coating. That is salt carried out by moisture, and it means water is moving through the wall.
- Repair a small area of failed coating before the film around it begins to lift.
Questions
Common questions
If your question is not here, call and ask. We would rather explain it properly than have you guess.
Can painted brick be returned to bare brick later?
Not easily. Removing coatings from porous masonry is slow, expensive and can damage the brick face. Treat painting brick as a long-term decision rather than something to try and reverse if you change your mind.
Will painting brick cause moisture problems?
Brickwork needs to be able to release moisture. That is why a breathable masonry system and correct preparation matter, and why underlying moisture issues — failed flashing, blocked weep holes, rising damp — should be resolved before coating rather than sealed over.
Does painting brick affect any warranty on the house?
That depends on the property, its age and any existing product or builder warranties in place. Substrate condition, the existing coating system and manufacturer requirements all need to be assessed for your specific property, and if there is a warranty in place it is worth checking its terms before proceeding.
How long does brick painting take?
Timing depends on the size of the facade, the amount of cleaning and repair required and the weather. We confirm an estimated duration after the inspection.
Further reading
Before you decide
Longer answers to the questions this work usually raises. No sales pitch — just what we would tell you on site.
Where we work
Brick across Melbourne
We work throughout Melbourne and surrounding suburbs, generally within about 40 km of the city. If your property sits outside that, ask — we travel for larger projects.
Balwyn · Brighton · Camberwell · Kew · Hawthorn · Malvern · Richmond · South Yarra · Toorak · Armadale · Canterbury · Surrey Hills
Explore
Related services
- Learn more
Exterior Painting
Brick, render, weatherboard, trim, decks, fences and pergolas prepared for Melbourne conditions.
- Learn more
Render Painting
Cement and acrylic render coated after condition, moisture and cracking are assessed.
- Learn more
Weatherboard Painting
Timber cladding prepared back to a sound edge, with end grain sealed and boards primed.
- Learn more
Surface Preparation
Washing, crack repair, sanding, caulking, wallpaper removal, priming and sealing — the work a finish depends on.

Free, no-obligation quotes
Get a written quote for your painting job
Tell us what needs painting and send a few photos. We will inspect the property and put a written, itemised quote in front of you — in Australian dollars, with the scope spelled out.