Skip to main content

Render

Render painting

Rendered facades look flawless when they are right and obvious when they are not. Most of that is decided before any coating goes on.

  • Free Quotes
  • Residential & Commercial
  • Local Melbourne Painters

What is render painting?

Render painting is the coating of cement or acrylic rendered walls, usually with a flexible membrane or masonry system rather than an ordinary exterior paint. The system is chosen to bridge the hairline cracking that render develops as a building moves, and to let the wall continue to dry outwards.

Overview

Render is a large, uninterrupted surface, which means any unevenness in the coating or any movement in the substrate is visible from the street. It is also a surface that hides its history — previous patch repairs, earlier coatings and moisture problems all sit underneath, and all of them affect what should be applied.

We assess the render before specifying: what it is made of, what condition it is in, whether it is cracking, and whether there is moisture behind it.

Summary

At a glance

Service
Render Painting — Cement and acrylic render coated after condition, moisture and cracking are assessed.
Surfaces and systems
Alkali-resistant sealers and bonding primers for masonry substrates, Exterior coatings with varying degrees of flexibility, selected to suit the render and its condition and Flexible fillers and sealants for cracks and control joints.
Where it is offered
Render is offered across Melbourne and surrounding suburbs, generally within about 40 km of Balwyn.
Quoting
Render is quoted in writing at no charge, after an inspection of the actual surfaces.

What we cover

What's included

  • Cement render

    Traditional sand and cement render, which is more rigid and more prone to hairline cracking.

  • Acrylic render

    Modern polymer-modified render, which behaves differently and needs a compatible system.

  • Condition and moisture assessment

    Drummy or hollow-sounding areas, rising damp and failed flashings identified before coating.

  • Crack repair

    Cracks opened, filled and finished so the repair does not telegraph through the coating.

  • Texture matching

    Patched areas finished to match the surrounding texture as closely as the render allows.

Our process

How the work runs

  1. Step 1: Assess the render

    Identify the render type and check for drummy areas, cracking patterns and signs of moisture behind the surface.

  2. Step 2: Clean

    Pressure washing to remove dirt, chalking and organic growth, with mould treated where present.

  3. Step 3: Repair cracking

    Cracks raked out, filled and finished. Where cracking suggests ongoing structural movement we will say so rather than simply filling it.

  4. Step 4: Bonding primer

    A primer or sealer suited to the render type and its porosity, which is what gives the finish coats a consistent surface to sit on.

  5. Step 5: Exterior coating system

    Coatings selected according to substrate condition, exposure and manufacturer requirements, then applied within their stated conditions.

  6. Step 6: Quality inspection

    Checked in daylight across the full elevation, where unevenness in coverage actually shows.

Why it holds up

What you get

  • Render type identified rather than assumed
  • Moisture and drummy areas raised before coating, not after
  • Repairs finished to match surrounding texture
  • Systems chosen for the substrate rather than applied uniformly

Systems and materials

  • Alkali-resistant sealers and bonding primers for masonry substrates
  • Exterior coatings with varying degrees of flexibility, selected to suit the render and its condition
  • Flexible fillers and sealants for cracks and control joints

The specific products for your project are named in your written quote, so you know what is going on your property before you accept it.

Worth knowing

Where this needs assessing first

Before committing to this work

  • Cracking that is structural rather than superficial needs assessing before coating. A membrane bridges hairline movement; it does not hold a moving wall together.
  • New render must cure before it is coated. The alkalinity of fresh cement will attack a system applied too early.
  • Render that is drummy or delaminating from the substrate needs repair first. A coating is only ever as sound as what it is applied to.
  • Persistent damp patches indicate water entering the wall from somewhere. Coating over them traps the moisture and the problem returns.

Questions

Common questions

If your question is not here, call and ask. We would rather explain it properly than have you guess.

  • Will the cracks come back after painting?

    A filled crack caused by ordinary shrinkage or settlement usually stays closed. Cracking driven by ongoing structural or thermal movement can reopen, because the movement continues regardless of what is applied over it. More flexible coating systems can accommodate minor movement, but no coating stops a moving substrate, and we will not tell you otherwise.

  • Do I need a flexible or elastomeric coating?

    Not always. Higher-build flexible systems suit some rendered surfaces with fine hairline cracking, but they are not the right answer for every facade and they are not a substitute for repair. The appropriate system depends on the render type, its condition and the manufacturer specification, and that is assessed during the inspection.

  • What are the dark patches on my render?

    Usually one of three things: organic growth, efflorescence from salts moving through the masonry, or moisture coming through from behind. They need different responses, so identifying which one it is comes before deciding how to treat it.

  • Can render be recoated in a much lighter colour?

    Yes, though going substantially lighter over a dark existing colour usually needs an extra coat to achieve even coverage. That is priced into the quote rather than discovered halfway through.

Further reading

Before you decide

Longer answers to the questions this work usually raises. No sales pitch — just what we would tell you on site.

Where we work

Render across Melbourne

We work throughout Melbourne and surrounding suburbs, generally within about 40 km of the city. If your property sits outside that, ask — we travel for larger projects.

Balwyn · Brighton · Camberwell · Kew · Hawthorn · Malvern · Richmond · South Yarra · Toorak · Armadale · Canterbury · Surrey Hills

Free, no-obligation quotes

Get a written quote for your painting job

Tell us what needs painting and send a few photos. We will inspect the property and put a written, itemised quote in front of you — in Australian dollars, with the scope spelled out.

Optional measurement cookies

With your permission, Google Ads uses cookies and information about your visit to measure which ads lead to quote requests and phone-link clicks. Your quote details are not sent to Google. You can use the website without allowing this.

Change your choice through Cookie settings in the footer. Withdrawing permission reloads this page. Privacy policy